Geometric Optimization of a Biogas Reactor
The client needed to determine the optimal geometry for a biogas reactor capable of achieving maximum mixing efficiency.
Hydroelectric Plant Pipeline Redesign and Discharge Jet Analysis Challenge
The client needed to redesign part of the piping network of a hydroelectric facility to incorporate a new discharge pipeline.
Wind Load Assessment for Solar Structures According to EUROCODE EN 1991-1-4
The client required a detailed assessment of wind loads acting on solar support structures in compliance with EUROCODE EN 1991-1-4.
Optimization of a Water Cooling Pipeline
The client needed to analyze a specific section of a water cooling system that included two mitered bends and a pipe diameter reduction.
Thermal Dissipation Analysis in a Waste-to-Energy Plant Challenge
The client needed to design and size the ventilation system for a room within a Waste-to-Energy facility.
Ventilation Assessment for a Fitness Room
The client required an assessment of indoor air quality and CO₂ dispersion within the fitness area of a gym. This enclosed space had high occupancy levels and significant ventilation demands. The objective was to verify whether the existing air renewal system was adequate and to identify potential areas with elevated CO₂ concentrations.
España
Baixada Gándara 16,
36331 Vigo
Spain
+34 886113547
USA
2500 CityWest Blvd
Houston TX 77042
USA
+1 7136145403
España
Baixada Gándara 16,
36331 Vigo
Spain
+34 886113547
hello@slidian.com
Una marca de 